Miniature Solenoid Valves

Solenoid Operated Miniature Valves are available in 2 or 3 way poppet designs as well as 3 or 4 way spool and sleeve designs. Valves have either 10/32 (M5) or 1/8 porting. Most valves have been designed for the special requirements of medical, dental and laboratory equipment. Custom designs are available for unusual applications.

Two or three way poppet valves are constructed of a brass base with stainless steel stems and encapsulated coils. Valves are designed for compact mounting and have several mounting configurations.

Three or four way spool and sleeve valves are compact and provide long life cycles. Constructed with an aluminum body, stainless spool and sleeve and have encapsulated coils.

Two types of molded pilot valves are also available for switching small volumes of air needed for remote piloting of other valves or devices.

Accessories include sub bases, manifolds and electrical connectors.

Push Button 16mm Brass 2/3 Way
The Series 64 solenoid valve is available for in-line, direct or manifold mounting. Its modular construction allows for maximum utilization of space. Accessories include connecting plugs, surge suppressors and manifolds. All standard valves feature a solid brass housing, buna N seals, encapsulated coils and are mountable in any position.

(276Kb)
Toggle Lever 22mm Brass 2/3 Way
The Series 65 solenoid valve is available for in-line, direct or manifold mounting. Accessories include connecting plugs, sub-bases and manifolds. All standard valves feature a solid brass housing, buna seals, encapsulated coils and are mountable in any position.

(304Kb)
Knob Operator 30mm Brass 2/3 Way
The Series 67 solenoid valve is available for in-line or manifold mounting. Its modular construction allows for maximum utilization of space. The valve is available with standard plug terminals. Accessories include connecting plugs, and manifolds. All in line valves feature a solid brass housing, buna seals, encapsulated coils and are mountable in any position. Manifold mounted valves have a cast zinc alloy base.

(206Kb)
Lever Operator Spool Valves (10-32 Ports)
Series 79, 81 and 84 solenoid operated spool valves are constructed of precision lapped steel spools and sleeves. Solenoid coils are encapsulated and have terminals for solder or plug connections. Valves are available for in-line, manifold or sub base mounting.

(269Kb)
Lever Operator Spool Valves (1/8 Ports)
Series 85 and 87 solenoid operated spool valves are constructed of precision lapped steel spools and sleeves.Solenoid coils are encapsulated and have terminals for solder or plug connections. Valves can be mounted in-line or on manifolds.

(259Kb)
Lever Operator Spool Valve Resilient Seal
The Series 83 sub base mounted valve provides a simple answer to miniature 4 way valving. The valve is constructed of a molded body and utilizes O-ring construction to provide a lightweight, durable alternative. The valve has red pop-up indicators to show position, as well as a manual override and an external air pilot supply port connection, used when switching pressures less than 35 PSI.

(171Kb)
Lever Operator Pilot Valves
The 3 way pilot valve section of general purpose solenoid-operated valves can be used as a remote air pilot valve or for switching low volumes of air when mounted on a sub base or manifold. The valve has a flow of approximately 2 CFM at 90 PSI. Operating pressure range is 0-150 PSI. The valve includes a red lever for manual operation.

(139Kb)
Lever Operator Manifolds
Manifolds are available for all solenoid operated 2 or 3 way valves. Units are constructed of aluminum bar stock with 1/8 metric supply ports at each end and 10-32 (M5) output ports along valve stack for Series 64 and 65 valves. Series 67 valve manifolds have 1/8 metric output ports. Manifolds are all pre-drilled to allow valves to be mounted side by side without intermediate spacing. Standard manifolds are available for single, double or 4 station configurations and can also be special ordered for up to 8 stations. Mounting is via an M5 tapped hole at each end of the manifold.

(358Kb)
Lever Operator Electrical Accessories
Standard replacement coils are available for all types of miniature solenoid valves. Coils are encapsulated to keep out water, oil and other contaminants providing splash proof protection when used with the corresponding socket and gaskets for miniature valves.

(233Kb)