Miniture Secondary Regulators

Kuhnke manufactures several types of precision regulators for use in fine regulation of air pressure on small air tools, breathing apparatus and other devices. Units are made of nickel plated brass or molded material and are adjustable or can be factory set for specific applications. Several types are available for mounting on manifolds in addition to standard in line versions. Output pressures range from 0 to 115 PSI depending on unit selected. Volume output can be up to 7 SCFM.

Sub - Miniature Pressure Regulator Sub - Miniature Pressure Regulator
The sub-miniature Series 50 regulator provides regulation of air pressure from 0 to 115 PSI. Available in both relieving and non-relieving versions, the unit's size and shape makes it ideally suited for mounting in dental, medical and laboratory equipment where close regulation and fine adjustments are necessary.

(1.14Mb)
Miniature Pressure Regulator Miniature Pressure Regulator
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass. The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator's range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180° apart on the side of the regulator body.

(1.02Mb)
Miniature Screw Driver Adjusted Pressure Regulator Miniature Screw Driver Adjusted Pressure Regulator
The Series 48 miniature regulator has characteristics similar to the Series 50 miniature regulator. The unit, however, is specially designed for systems where constant adjustment of pressure is not necessary.

(1.16Mb)
Manifold Mounted Miniature Pressure Regulator Manifold Mounted Miniature Pressure Regulator
The manifold mounted regulator provides regulation of air pressures from 0 to 145 PSI. The miniature regulator is available in both relieving and non-relieving versions in a nickel-plated brass housing. The unit is provided with a third port for connection of a pressure gauge.

(1.45Mb)
Manifold Mounted Miniature Pressure Regulator Manifold Mounted Miniature Pressure Regulator
The manifold mounted regulator was designed for use on custom manifolds. The miniature regulator is available in both relieving and non-relieving versions in a molded housing.

(641Kb)